Michelli provides standard traceable and ISO/IEC 17025 accredited force calibration services for dynamometers, force gauges, load cells, force transducers, tension meters, and other force measurement equipment.
Force measurement equipment helps teams quantify the push, pull, compression, tension, or load applied to an object. When that equipment drifts out of tolerance, the impact can affect safety checks, proof testing, product validation, lifting applications, quality records, and production decisions.
Michelli calibrates a wide range of force measurement devices across many makes and models, including equipment purchased from other suppliers. Service options may include standard traceable calibration, ISO/IEC 17025 accredited calibration, field calibration, in-lab calibration, and documentation based on the device, application, and required scope.
Calibration support for force devices used to measure pull, push, compression, tension, and applied load.
Force test stands capable of producing up to 700,000 lbs of compression and tension.
Calibration documentation and asset management to support quality systems, audits, and regulated measurement programs.
Force measurement quantifies the amount of force being applied to an object. That force may be a push, pull, compression load, tension load, lifting force, or applied load used to test product strength, equipment capacity, or process performance.
Force measurement devices may be used to measure the pull of gravity on an object, the maximum capacity a material can withstand, the amount of force required to remove a lid, or the tension applied during a lifting, testing, or production process.
Force measurement supports applications where load capacity, lifting force, or safe operating limits must be verified.
Force gauges, testers, and load cells help teams evaluate product strength, performance, and repeatability.
Dynamometers, crane scales, load cells, and force transducers support lifting, weighing, and industrial process needs.
Force calibration compares the readings produced by a force measurement device against an appropriate certified force measurement standard. Through controlled compression or tension, the device is tested to confirm that its readings align with the required tolerance.
The calibration process varies by device type, capacity, direction of force, and required documentation. A dynamometer, load cell, force gauge, tension meter, or force transducer may each require different fixtures, ranges, standards, and procedures.
Controlled tension or compression is applied based on the device and procedure.
Device readings are compared against certified force measurement standards.
Adjustments may be made when the device allows and service scope requires it.
Calibration results are documented for quality, audit, or traceability needs.
Michelli can help determine the appropriate calibration path based on your device, force range, tension or compression requirements, quality system, and documentation needs.
Standard traceable calibration is available for many force measurement devices and may be appropriate when documented calibration traceable to recognized measurement standards is required.
ISO/IEC 17025 accredited force calibration is available for applicable devices and scopes when a higher level of documented measurement confidence is required.
On-site force calibration is available for many force measurement devices. Field service can help support equipment that is difficult to move or part of larger facility workflows.
In-lab force calibration may be recommended or required for devices, ranges, fixtures, or procedures that benefit from controlled standards and dedicated force calibration equipment.
Michelli offers force calibration services for a range of devices used in tension, compression, lifting, proof testing, quality control, and industrial measurement applications. Contact your nearest Michelli location to confirm the appropriate service scope for specific devices.
Force calibration documentation may include calibration results, traceability information, device identification, standards used, and other details based on the selected service scope.
Michelli can help determine whether standard traceable calibration or ISO/IEC 17025 accredited calibration is the right fit for your force measurement equipment, quality program, or audit requirements.
Request Calibration Service
Force calibration services may be available under standard traceable or ISO/IEC 17025 accredited scopes depending on the device, range, and calibration requirements.
Many force calibration services can be performed on-site, while some devices, ranges, or accredited requirements may need to be performed in an ISO 17025 accredited calibration laboratory.
If you have multiple devices, an equipment list can help Michelli review the devices, capacity ranges, tension or compression requirements, and documentation needs before scheduling service.
Available for many force measurement devices depending on device type, range, scope, and location.
Portable devices may be shipped with an equipment list to help streamline intake and service planning.
Michelli can review device type, manufacturer, model, capacity, and documentation needs before scheduling calibration.
Tell us about your force measurement devices, required service type, documentation needs, and location. A Michelli specialist can help determine the appropriate calibration path.
Complete the form and a Michelli specialist can follow up about your force calibration needs.
