Michelli provides standard traceable and ISO/IEC 17025 accredited temperature calibration services for thermometers, thermocouples, RTD probes, infrared thermometers, ovens, incubators, dry blocks, freezers, and other temperature measurement equipment.
Accurate temperature measurement is critical for ensuring product quality, process control, proper storage conditions, equipment performance, and safety. When thermometers, probes, controllers, or temperature chambers drift out of tolerance, teams may be making decisions from readings they cannot fully trust.
Michelli calibrates a wide range of temperature measurement instruments across many makes and models, including equipment purchased from other suppliers. Service options may include standard traceable calibration, ISO/IEC 17025 accredited calibration, field calibration, in-lab calibration, and documentation based on the instrument, application, and required scope.
Calibration for thermometers, probes, controllers, sensors, transmitters, indicators, and related instruments.
Support for ovens, incubators, freezers, dry blocks, baths, chambers, and temperature systems.
Calibration documentation and asset management to support quality systems, audits, and regulated measurement programs.
Temperature measurement, or thermometry, assigns a value to how hot or cold something is so that the condition can be monitored, controlled, documented, and understood. These measurements are used in laboratories, production areas, storage environments, maintenance programs, and regulated processes.
Temperature instruments may include thermometers, thermocouples, RTD probes, infrared sensors, bimetallic devices, controllers, data loggers, and temperature monitoring systems. Calibration helps confirm that these instruments are producing readings that are appropriate for their intended use.
Temperature readings are used to monitor production, storage, processing, and quality conditions.
Instruments used in labs, incubators, freezers, ovens, and environments require documented control.
Temperature tools are used to verify equipment condition, thermal performance, and operating ranges.
Temperature calibration compares a temperature measurement instrument against an appropriate standard with a known value. If the instrument reading does not match the standard within the required tolerance, adjustment may be performed when available and included in the service scope.
The process varies by instrument type. Technicians may use a dry bath, liquid bath, ice bath, oven, chamber, or other temperature calibration standard to generate known temperatures and verify performance across the required range.
Instrument readings are compared against an appropriate temperature standard.
Testing may be repeated at multiple temperature points based on the procedure.
Adjustments may be made when the instrument allows and the scope requires it.
Results can be documented for quality, audit, or traceability needs.
Michelli can help determine the appropriate calibration path based on your instrument, application, temperature range, tolerance requirements, quality system, and documentation needs.
Standard traceable calibration is available for many temperature instruments and may be appropriate when documented calibration traceable to recognized measurement standards is needed.
ISO/IEC 17025 accredited temperature calibration is available for applicable instruments and scopes when accredited documentation is required.
On-site temperature calibration is available in some areas for certain devices. Field service can support equipment that is difficult to move or tied to facility workflows.
In-lab calibration may be recommended or required for certain instruments, ranges, procedures, or accredited calibration needs that benefit from a controlled calibration environment.
Michelli offers temperature calibration services for a broad range of contact, non-contact, probe, chamber, controller, and monitoring instruments. Contact your nearest Michelli location to confirm the appropriate service scope for specific devices.
Temperature calibration documentation may include calibration results, traceability information, instrument identification, standards used, environmental details, and other information based on the selected service scope.
Michelli can help determine whether standard traceable calibration or ISO/IEC 17025 accredited calibration is the right fit for your instruments, quality program, or audit requirements.
Request Calibration Service
Temperature calibration services may be available under standard traceable or ISO/IEC 17025 accredited scopes depending on the instrument and calibration requirements.
On-site temperature calibration is available in some areas for certain instruments, while some devices may be better suited for in-lab calibration. Portable devices can often be shipped or delivered to the nearest Michelli location for service.
If you have multiple instruments, an equipment list can help Michelli review the devices, recommend the right calibration path, and coordinate service efficiently.
Available for some temperature measurement devices depending on instrument type, scope, and location.
Portable instruments may be shipped with an equipment list to help streamline intake and service planning.
Michelli can review manufacturers, model numbers, ranges, and service needs before scheduling calibration.
Tell us about your instruments, required service type, documentation needs, and location. A Michelli specialist can help determine the appropriate calibration path.
Complete the form and a Michelli specialist can follow up about your temperature calibration needs.
