Torque Calibration Service

Michelli Weighing & Measurement can perform your standard NIST traceable torque calibration, or ISO 17025 accredited torque calibration. Our torque experts perform a wide range of services, including torque wrench calibration, bolting tool calibration & torque equipment repairs.

What is torque measurement?

Torque is a rotating force. (Rotation could refer to either turning or twisting.) Torque tools, which produce turning or twisting force, are utilized in a great number of applications. Torque measurement determines the effectiveness of the force being applied by a torque tool. During torque calibration, the Michelli Weighing & Measurement service team confirms that the amount of force being indicated by a torque tool is the actual amount of force being produced by the tool to ensure that users don’t under-torque or over-torque during use.

Calibration technician works at the torque calibration bench

Torque Wrench Calibration Bench in Michelli Calibration Lab

What does torque calibration entail?

During torque tool calibration, the Michelli Weighing & Measurement technicians compare your torque tool to a standard, NIST traceable torque tool. This comparison is performed to ensure that the level of torque produced by your torque tool at different inoz or ftlb matches the amount produced by the standard, NIST traceable torque tool at the same levels.

If the amount of torque applied by your torque tool at different intervals does not match the amount of torque applied by the standard NIST traceable torque at the same intervals, your torque tool will be adjusted to match the standard. Upon completion, the amount of torque you set the torque tool to apply will actually be the amount of torque produced by the tool during use.

Michelli Weighing & Measurement offers torque calibration of the following measurement devices:

Torque Standard

Torque Tester

Torque Watch

Torque Wheel

Torque Transducer

Torque Multiplier

Torque Wrench, Adjustable

Torque Wrench, Dial

Torque Wrench, Electronic

Torque Wrench, Hydraulic

Torque Wrench, Pneumatic

Torque Wrench, Preset

Torque Analyzer

Torque Arm

Torque Calibrator

Torque Driver

Torque Gage

Torque Gun

Torque Handle

Torque Indicator

Torque Limiter

Torque Meter

Torque Presets

Torque Screwdriver

Torque Sensor

Click to view our ISO/IEC 17025 accreditation certificates.

While NIST traceable calibration is available on-site or in our laboratories, ISO/IEC 17025 calibration is only available in one of our ISO 17025 accredited laboratories.

Speak to a torque expert

Are you interested in purchasing or renting a torque tool? Do you need your current torque tools calibrated? Find your nearest location & give us a call to speak to a Michelli Weighing & Measurement expert today.

Find Your Nearest Location